Tag Archives: tech - Page 2

Aptly named software

Just a quick post to also serve as a mental note for later, with two mentions to start off with:

  • RANCID — see here, aptly named because it is indeed quite rancid
  • slapd — the/a opensource LDAP server. The name is equally funny in Afrikaans and English, although the meanings are slightly different (“slap” would translate to “flimsy” for this specific context of amusement)
  • cacti – much like the cactus-plant from which this application derives its name (and which it uses as a logo), it’s guaranteed to be a pain to handle if you’re doing anything more than look at it
  • doxygen – check up the definition for ‘doxy’. This annoying software feels much the same way. Shacks up with something important (in this case the actual docs you care about), but you have to put up with it.

DNS Platform Migration Fun

This post could go by the alternative title “Screw you, ISC, and thanks for making software that makes me hate DNS even more”. So let’s dive right in, shall we?

(to those who don’t care for the intermediate ranting and DNS explanations, page down for the tech bits)

There are various criticisms of the Domain Name System — the thing which enables anything on the internet to turn “www.google.com” or any other such name into something that is meaningful to a computer (see here) — but for the most part it works reasonably well. You set up some DNS software, perhaps battle with the config for a while, and then it works. But as a quote I’ve seen somewhere (and can’t find the origin of now with a quick search) says, “you can’t truly recommend some software [tool] until you can tell me why it sucks.” And ISC’s BIND is arguably a highly irritating piece of software, which has over the years led to a rise in popularity for various other options. Amongst these you’ll find some general free/opensource implementations, as well as some commercial platforms:

(That’s the nice thing about diversity and openness — in this regard, an open protocol — you always get some choice and you can pick which one best suits your needs.)

 

Some years ago, long before my time at my current employer, there was a business requirement for some DNS support in our product suite. And BIND was chosen as the platform, since it’s a fairly well-known one. As time progresses, so do the things we do, and one day we found BIND was no longer sufficient to do what we needed to. Amongst others, things like a supermaster (a master from which a slave will accept all domain information, regardless of whether that slave knows of such a domain) and dynamic backend functionality were some of those needs.
Now some options like bind-dlz and friends existed, but none of these really suited us. In the end we decided upon PowerDNS with our own custom software written to handle the dynamic things as business rules would require, and set forth on this path. Some time passes with Rossi writing all the backend code which we’ve then successfully been running in combination with PowerDNS for some time now.

 

Of course, we still have all those old BIND-based installations to get upgraded, and this is that tale. Thankfully, the latest version of our platform was designed with exactly this sort of scenario in mind, since we have to inter-operate with other AXFR-speaking nameservers. So I think “let’s just use the config interface to add the migration host as a second slave, massage the data as required on there and then port that data over to the new platform” even as a tiny voice in my head says “it’s never that simple and you know it.” About 2 hours later I’m found at my desk swearing violently about all manner of things, which is my out when dealing with frustrating software. This is because I’d ended up trying to find out why BIND wasn’t actually slaving anything to my “new” nameserver, even though all the configs and zonefiles were right. Not just that, it had also at some point stopped slaving everything it should to the secondary nameserver, which at this point isn’t a worry since I’m replacing it anyway.

 

:: TECH ::

After figuring out the bits of the migration that matter — such as fixing up the SQL output (from the handy zone2sql tool from pdns) that had some oddities due to what looked like multiple $ORIGIN statements in one file — had been figured out, it was pretty painless to move. There were some fun points, like handling multiple $INCLUDE statements in a zonefile, and *hattip* to Jonathan Hitchcock (for the pre- and post-insert idea) and Bryn Divey (for googling better than I).

 

So, sed trick 1, splitting the file into parts:


cat foo.zone | sed -n '1,/match/p' > firstbit
cat foo.zone | sed -n '1,/match/!p' > secondbit
cat firstbit secondbit > newfoo

Sed trick 2, reading in an external file to use it as the replacement text. We have:


# grep INCLUDE 10_in-addr_arpa.zone
$INCLUDE "/var/cache/bind/10_in-addr_arpa.zone.ns";
$INCLUDE "/var/cache/bind/10_in-addr_arpa.zone.mx";

We do:


sed -i '/$INCLUDE.*\.ns.*$/ r 10_in-addr_arpa.zone.ns' 10_in-addr_arpa.zone
sed -i '/$INCLUDE.*\.mx.*$/ r 10_in-addr_arpa.zone.mx' 10_in-addr_arpa.zone

And tada, instant awesome. This reads the 10_in-addr_arpa.zone.mx file for us, and replaces from the appropriate “$INCLUDE” start to end with the contents of said file.

 

Another issue I ran into was having the generate the appropriate reverse-entry zones for all the public IP netblocks, and with two /21s and a /18 to worry about I wasn’t planning to do myself if I could help it, so I employed a quick hack with ipcalc and dnspython to transform my /18 into its various component /24s, and then generate reverses:


ipcalc 11.22.33.0/18 /24 | grep 'Network.*/24' | awk '{print $2}' | cut -d"/" -f 1
11.22.0.0
11.22.1.0
11.22.2.0
...

We can then easily manipulate these in python or sed or cut, depending on how hacky we feel, but I went with python since I was already using MySQLdb to insert the records after massaging them into the right form.


>>> import dns.reversename
>>> range = "10.22.0.0"
>>> print dns.reversename.from_address(range).to_text().split(".",1)[1]
0.22.10.in-addr.arpa.

And that’s it for somewhat useful little tricks. There was a bit of a discussion had about delimited formats like this, and Piet Delport (see blogroll) hacked up a neat little delimited datatype which you can find over here. Quick usage instructions:


>>> d = delimited('foo.bar.baz', '.'); d.sort(); print d
bar.baz.foo
d[1:] -> 'bar.baz'
d[1:2] = ['x', 'y', 'z']; d -> 'foo.x.y.z.baz'
>>> d = delimited('0.2.1.10.in-addr.arpa', '.'); del d[0]; print d
2.1.10.in-addr.arpa.

And now as the sounds of Mogwai, Flunk and Placebo massage my tired noggin, it’s time for me to go to bed.